Elite DIY Portable Outdoor Projection Screen Outdoor Screen
|Dimensions:||115.4" Height x 153.9" Width; 192" Diagonal|
The DIY Outdoor Movie Screen is made of a theater-grade PVC material that is easily kept in place by its corner grommets. The grommets keep the surface flat and easily secure it to garage door frames, walls, trees and pole supports. Its 1.1 gain matte white projection surface is textured to avoid hot-spotting while also providing color neutrality and a wide viewing angle.
Each screen is professionally matted to enhance visual contrast and improve the quality of the projected image. All of the screens' features, plus their DIY simplicity, give you one more reason to look forward to nice weather. Elite Screens' DIY series come in sizes from 94” to 236”with 4:3 or 16:9 aspect ratios.
- PVC vinyl material for outdoor usage
- DynaWhite 1.1 gain matte white material
- Textured surface eliminates hot-spotting
- Wide diffusion uniformity (viewing angle)
- 4-corner grommets for easy setup
- Rigging cords included
- Standard 2-year warranty
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Would I be able to set this up in May and leave it up until November? I live in Boston, so there will be rain, wind, heat, and maybe even snow. I currently have a screen made from PVC roofing material that stays up for this time frame, but I'd like to improve the quality.Asked on 3/17/2017 by Scott from Boston MA
A:these screens are not made to be outside at all times, rather to set up and bring back inside the same day after use. if left outside over an extended period of time it would be damaged.Answered on 3/28/2017 by Lisa from .
Q:I am considering buying this for my house in Palm Springs and using it at night. I am concerned about it being in the heat for storage when I am not using it. Realistically, would this be OK to have in a garage (covered from direct sunlight) but still be exposed to 110+ temperatures when we are not using it?Asked on 5/13/2012 by Mike from United States
A:It should be fine in a garage with 100+ temperatures.Answered on 7/9/2012 by Anonymous
A:This screen is made from PVC vinyl, which will easily withstand 110+ temperatures without direct sun exposure.Answered on 5/13/2012 by Community Answer from None
Q:can this be used for rear projection?Asked on 5/2/2012 by arttech geek from san francisco, ca
A:no, you have to buy a special surface for rear projection - this is front projection onlyAnswered on 5/7/2012 by Anonymous
Q:Why is this in a 4:3 aspect ratio and not a 16:9 ratio since most projectors are HD?Asked on 5/1/2012 by M
A:You have a choice of 4:3 or 16:9 screens in the DIY line up. You would consider the DIY114H, DIY133H or DIY236H......all of these are 16:9 aspects.Answered on 5/4/2012 by Todd from Tampa
Q:How do you choose a size? How big is itAsked on 4/25/2012 by Jmac
A:DIY screens are for front Projection. The screen size is typicallye determined by how far back you'll be sititng to view the image. You want to sit 1 1/2 to 2 times the width of the image. For outdoors you usually would go with a larger screen but again it will depend on how far back you are sitting.Answered on 5/22/2012 by Anonymous
We have no downloads available for the Elite DIY Portable Outdoor Projection Screen at this time.