Peerless PRG Precision Gear Projector Mount - Black
California residents warning: Cancer and reproductive harm- See www.P65Warnings.ca.gov for more information.
Available in Black, Silver, and White
Peerless PRG Precision Gear Universal Projector Mount is simplifying the way image alignment is done. The patent-pending precision gear design allows exact tilt and roll image positioning by either simply turning two adjustment knobs with a Phillips screw driver, or use the tool-less option by extending the knobs to adjust by hand. Just set the precision gear to the desired position to secure it in place it will hold its position even during projector maintenance. With Peerless PRG Precision Gear Projector Mount, just set it and forget it. No more adjustment screws. No more micro adjustments. No more hassles.
- Patent-pending precision gear provides accurate projector image alignment
- Two adjustment knobs control projector image alignment
- Pitch: ±20°, Roll: ± 10°, Swivel: 360° (when mounted on extension column, ±15° when flush mounted on ceiling)
- Horizontal wrench access slots make flush mounting installations fast and easy
- Pre-assembled design reduces installation time
- Quick-release mechanism to easily service projector
- Cable management allows cables to be routed through projector mount out of sight
- Security hardware provided for theft deterrence
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Will this mount work with a JVC DLA-RS420 Projector?Asked on 3/3/2018 by Bill from undisclosed
Q:Does this mount require an additional ceiling mounting plate?Asked on 10/17/2016 by Gary from North Georgia
A:No it is all inclusive..Answered on 10/17/2016 by Anonymous
A:All hardware required for integration with projector and attachment to ceiling joist is supplied with the product. I found the projector mount easy to install and to adjust.Answered on 10/17/2016 by Anonymous
A:You can screw it directly to the ceilingAnswered on 10/17/2016 by Anonymous
A:you only need a plate if you are extending it down from the ceiling via a pipe. otherwise, you are good to go.Answered on 10/19/2016 by Todd from Tampa
Q:does it support a 5030 Epson?Asked on 6/10/2016 by Luis R from Caracas, Vla
A:Yes, the mount will work with the Epson projector.Answered on 6/15/2016 by ProjectorPeople.com from Tampa, FL
Q:Will it work with Sony 40ES?Asked on 9/3/2014 by Amit
A:Yes, it will.Answered on 9/4/2014 by Anonymous
Q:I already have a mount on my ceiling with a 1.5" NPT pipe extension. I am simply wanting to use the portion of this mount which attaches to my projector and to the existing NPT pipe. Will this work?Asked on 4/4/2013 by Mike2.35:1
A:Yes, it connects to that size pipe.Answered on 4/4/2013 by Sarah Buss Fonk
Q:Will this work with a Panasonic PT-LB80 projector?Asked on 2/21/2013 by Mike
A:The PRG Precision Gear Projector Mount is a universal projector and can be adjusted to fit any projector, including the Panasonic PT-LB80 projector.Answered on 2/21/2013 by Community Answer from None
A:Yes, it will.Answered on 2/28/2013 by Anonymous
Q:Will this work with an Epson Powerlite Home Cinema 8350 Projector?Asked on 12/6/2012 by TitoC
A:Yes it willAnswered on 12/19/2012 by Anonymous