Sanus Systems VMPR1 Universal Projector Mount, Black
Built to fit nearly any projector, the Sanus VMPR1 universal mount features a spider design that allows for maximum versatility while allowing for proper ventilation to your projector. Low profile flush mount fastens to the ceiling with a sturdy flush mount plate. Features independent roll, pitch and yaw adjustability and is encased in a decorative casing for a clean look.
- Universal mount fits nearly all projectors
- Independent adjustments make aiming easy
- Quick-release mechanism makes maintenance easy
- Professional grade construction
- Includes ceiling adapter allowing mount to attach to angled or vaulted ceilings, and optional down pipe extends projector 7" from the mount
Note: May not be compatible with select Optoma projectors. Special parts may be required. Call a Projector Expert for details. See list below products that require the additional hardware.
- A K DXD 7015
- ACCO Nobo S16E
- ACCO Nobo S18E
- ACCO Nobo X16P
- ACCO Nobo X23M
- ACCO Nobo X25M
- NEC Multisync LT20E
- OPTOMA EP 706
- OPTOMA EP 709
- OPTOMA EP 716
- OPTOMA EP 719
- OPTOMA EP 729
- OPTOMA EP 738
- OPTOMA EP 739
- OPTOMA EP 739H
- OPTOMA EP 741
- OPTOMA EP 745
- OPTOMA H27
- OPTOMA TS 400
- OPTOMA TX 700
- TOSHIBA TDP-S8U
- TOSHIBA TDP-T9U
Projectors that require additional/alternate hardware:
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:What is the outside diameter and thread size of the optional down pipe?Asked on 8/14/2015 by Installer Dan from the Colony, TX
A:The optional pipe included in the box is 1 inch diameter and 7 inches long.Answered on 8/20/2015 by Sarah
Q:can this be used with an extension pipe longer than 7"? is there a maximum length pipe that can be used?Asked on 10/28/2014 by nfbc from Chicago, IL
A:sure, any standard threaded 1" pipe from the hardware store should work.Answered on 11/4/2014 by Sarah
A:An ordinary pipe threaded at both ends from the hardware store works just fine. I have one installation with a 3 ft long pipe. I don't think there is a limit, but the longer the pipe, the more shaky it's going to be.
Sent from my iPadAnswered on 10/28/2014 by Anonymous
Q:If the drop pipe is not used, how far from the ceiling with the projector end up being?Asked on 10/6/2013 by Nick
A:Without the drop pipe the projector will be attached 5 inches below the ceiling. If you do use the drop pipe that will increase the distance 7 inches (12 inches total).Answered on 10/6/2013 by Community Answer from None
A:The bottom of my projector is 9 inches from the ceiling. There are about 3..5 inches between the ceiling and the top of the projector.
Sent from my mobile officeAnswered on 10/6/2013 by Anonymous
A:About 4.5 inches on a panasonic ae7000Answered on 10/6/2013 by Anonymous
A:The height of the mount without the pipe is 5".Answered on 10/7/2013 by Anonymous
Q:Could you please tell me if this mount will work on the Epson 5020UB and if so, do I need any additional parts?Asked on 5/23/2013 by CAM from Appleton, WI
A:It worked great for me. No additional parts were needed.
Sent from my iPhoneAnswered on 5/23/2013 by Anonymous
A:The Sanus Universal mount will work with the Epson Projector. You will not need any other accessories.Answered on 6/11/2013 by Anonymous
Q:Hello, I will be ordering the w1070 very soon from here and would like to know if this will fit the Benq W1070 for a vaulted ceiling application. Thanks in advanceAsked on 3/1/2013 by Shrapr from Dallas, TX
A:Yes, according to the product page, the VMPR1 includes a ceiling adapter to fit vaulted ceiling applications, and it is universal and will work with all projectors aside from those listed on its' product page, which require additional hardware.Answered on 3/2/2013 by Community Answer from None
A:Yes it will. The Sanus VMPR1 comes with an angled ceiling mount and 7" drop pipe.Answered on 4/2/2013 by Anonymous
Q:Will this mount support the Epson 3020?Asked on 2/15/2013 by BruceWayne from Redford, MI
A:Yes it will. I am using the same.Answered on 2/16/2013 by Anonymous
A:Yes the VMPR1 Projector Mount will support the Epson 3020 projector.Answered on 2/15/2013 by Community Answer from None
A:Hi Mr Wayne, any of the universal mounts will work with the Epson HC3020. This also has up to 30 degree adjustment for a vaulted ceiling. the 1" pipe hole makes any length required a local purchase.Answered on 2/19/2013 by Mike from Tampa FL
Q:Will this work on a sloped ceiling?Asked on 11/21/2012 by Dan
A:Yes if using the extension rod.
Sent from my iPadAnswered on 11/22/2012 by Anonymous
A:Yes, this will work on a sloped ceiling.Answered on 11/22/2012 by Community Answer from None
A:Yes. I'm using it in that application. It is also flexible enough to use with just about any projector.Answered on 11/22/2012 by Anonymous
A:yesAnswered on 12/4/2012 by Lisa from .
Q:Will it fit a JVC DLA-X30 projector?Asked on 7/27/2012 by Shak from Houston, TX
A:the JVC will not work well w/ the universal mounts. You would be better off going w/ the specific mount for this projectorAnswered on 8/2/2012 by Stacey from Tampa
Q:can this mount be used for th power lite 8350?Asked on 7/1/2012 by hbp
A:Yes this mount will work with the Epson PowerLite 8350 Home Cinema Projector.Answered on 7/2/2012 by Community Answer from None
A:yes it will work with the HC8350Answered on 7/9/2012 by Anonymous
A:Yes. But it's not very good. The mount doesn't attach to the middle of the projector. This causes the projector to torque on the minute causing it to be misaligned often.
Sent from my iPhoneAnswered on 7/2/2012 by Anonymous
Q:WILL THIS WORK WITH THE EPSON 8350 AND ARE SCREWS INCLUDED TO MOUNT TO THE PROJECTOR?Asked on 5/5/2012 by MIKE
A:Worked great for me. The kit came with everything we needed.Answered on 5/5/2012 by Projector People Customer
A:Without knowing about the Epson specifically, I would assume yes. The mount is very adjustable. It does come with hardware to attach to the projector, and if I remember correctly, I think it comes with bolts to attach to the ceiling as well.
Sent from my iPhoneAnswered on 5/5/2012 by Projector People Customer
A:Yes universal mount very versatile screws are included.Answered on 5/6/2012 by Projector People Customer
A:I do not remember if the screws to attach to my projector came with the mount or if they came with my projector. I didn't have to purchase any additional screws to mount my projector.
As far as it working with the Epson, I would think it would. The four arms that attach to the projector adjust in so many different ways that I find it hard to believe that it wouldn't work. I have a Panasonic PT AE4000U and the mount holes are very oddly placed. But each mount arm moves in and out, left and right, and the metal piece that attaches to the projector swivels. So you should be able to line it up with your projectors configuration.Answered on 5/6/2012 by Projector People Customer
A:This mount does work with the Epson 8350. All the necessary hardware is included. Remember this is a universal mount so there is some adjustment needed. With a phillips head screw driver and a small adjustable wrench, it is made to fit quite easily.Answered on 5/7/2012 by Projector People Customer
A:It's ok,it works very well for one year,mounted in the ceiling.Answered on 5/8/2012 by Projector People Customer
A:Yes, and yes:)Answered on 5/9/2012 by Anonymous